1996 Camry 5S-FE engine rebuild

Since I lost compression in cylinder 4 after adding the turbo, it was decided to pull the motor and look at what was causing the blowby. Once we got the engine open, we found that cylinder 4 was scored by the rings. This is presumably where the compression was being lost.

Today, April 6, 2002, we began preparing to remove the engine.

Phase I : Engine removal & tear down

Phase II : Cleaning old parts, ordering new parts, machining various parts

Phase III : Engine reassembly

Phase III, day 2

Phase IV : Engine installation

Phase IV, day 2

Phase V : Make any final adjustments or repairs...get the thing running!